3/4" Walnut Pre-Cut Lumber Pack, 4 Boards (Choose Your Size)

Close this
Add a Headline
What are your comments?
How familiar are you with it?
How would you describe yourself?
(optional)
Only used to notify you about your review
SKU: HBWAL44_4p
3/4" Walnut Pre-Cut Lumber Pack, 4 Boards (Choose Your Size)
20% Off Online Overstock!

$69.00 $55.00 /Pack

Free Shipping
48 U.S. Ground Service
 

Online Exclusive!

Only available online. For in-store purchase a similar product may be available instead.
  • Classic American wood
  • Premium brown color
  • Easy ready-to-go sizes
Why Choose Walnut?

One of the most enjoyed American hardwoods for its fine-yet-open grain, unique patterns, and bold dark color. Walnut is easy to cut, shape and sand, and the wood takes on an amazing look with a clear finish.

Simple Pre-Cut Size!
These dimensional DIY boards make it easy to get started on your project. They're perfectly sized to your choice of width and length with clean, straight edges and smooth faces. They're lovingly milled from kiln dried, Select & Better lumber so you get gorgeous, clear, ready-to-use wood.

  • 4 beautiful boards
  • Clean all 4 sides
  • FREE SHIPPING 48 U.S.

Thickness 3/4" (≈ 3/4" approx)
Width 3.5", 5.5"
Length 24", 36"
Quantity 4 boards
Approximated, actual size may vary +/- 1/8"
Weight

3.33

lbs /Bd. Ft.
-6.98% lighter than red oak (3.58 /bd. ft.)
Hardness

1010

Janka Rating
-21.71% softer than red oak (1290 psi)
Density

0.59

Specific Gravity
-7.81% less dense than red oak (.64)

General Workability
Good 4/10
Red Oak

Wood Texture
Fine 3/10
Red Oak

Ease of Finishing
Good 4/10
Red Oak

map of where Walnut tree grows

(Juglans nigra)
Walnut grows in North America

View All Walnut Products

color of Walnut
Color Range
Light to dark brown or chocolate brown.
the Walnut tree
What's The Tree Like?
A moderate sized tree reaching about 100 feet and producing a trunk up to 60" in diameter.
other names for Walnut
Other Names
American black walnut, American Walnut, Black Walnut, Eastern black walnut
uses for Walnut
Some Typical Uses
Gun stocks, musical instruments, fine furniture, cabinetry, flooring.
Pages 1   2
2 / 5
May 6th, 2024
Verified Buyer

Hobbyist Woodworker
Received bowed boards
3 of the 4 in the pack were bowed. The boards were already a small size but receiving them bowed means they will have to be planed again and even less material is usable. This might be normal for larger boards but small boards means I just wasted money.
Familiarity: I haven't used it
Woodworkers Source Responds
Let's get you a refund or replacement in process! Log into your account, navigate to your order and locate the "Report a Problem" button. We'll get you whatever you need. Thanks!
5 / 5
February 10th, 2021
Verified Buyer
BE
Gardiner MT
Semi-Professional Woodworker
Table apron
The wood came exactly as described with no knots or splitting. Finish was great, all I had to do was cut to size and attach. Just some light sanding to finish. I was very pleased with the look and quality of the pieces.
Familiarity: I've used it in several projects
4 / 5
October 8th, 2019
Elnrik
CO
Very good boards
I purchased 9 of these boards. Only 2 of them were bowed enough to worry about - one has just over a 1" rise across the total 6' length. I'll have to cut that one down, plane/join it flat, and use it as a shelf or something. The others are mostly flat, less than 1/4" of bow along the 6' length. All of them will need run through the joiner to achieve perfect straightness. I should end up with 1/2" straight and flat boards when finished, which works out great for me.\n\n3 boards have large knots, but only on one face of the board. I can probably hide the knots on this project, assuming they don't tear out in the planar, and the cathedrals on the opposite side are attractive. None of the boards have twist, which is great.\n\nAll the peices have nice grain and figure. They are all dimensioned to the same size. 3/4" x 5.5" x 6'.\n\nPackaging was good and shipping was reasonably fast. Only 1 board had a dent from shipping, and I think I can iron it out.\n\nAll in all, I'm happy with the product and couldn't really expect much better. Thanks guys!
3 / 5
July 5th, 2019
Verified Buyer
n/a
n/a
New Woodworker
Hobby boards
Both cherry and walnut 1 x3 x3 ft boards had a 1/8" twist. Did not effect the projects they were bought for but wouldn't be good for large projects. The various dowels purchased at the same time were excellent.
Familiarity: I've used it once or twice
5 / 5
January 24th, 2019
Verified Buyer
David
Georgia
Hobbyist Woodworker
Black Walnut hobby board.
Beautiful wood, beautiful grain. Well finished, perfect for my projects.
Familiarity: I've used it in several projects
5 / 5
May 28th, 2018
Verified Buyer
Fox
Iowa
Stunning grain for a project board
I wanted an 1x6x6 to make a wooden beer mug for my father, and I have to say I am very impressed with the grain for a "hobby board". Certainly FAS grade.

The Joys of Building with Great Woods

What's 4/4, 8/4, 12/4, etc.?
Understanding hardwood lumber starts right here with these wacky fractions.
Lumber Grades Explained
If you're expecting perfect clear lumber 100% of the time, you're in for a surprise. Here's a summary of the hardwood lumber grades and what to expect from them.
3 Steps To Figure Out How Much Lumber You Need
Board feet isn't your everyday kind of math, but these three simple steps make it easy to figure out your project.
Project Planner Worksheet
Here's a handy (and free) Excel worksheet that helps you estimate the lumber needs for your project.
Understand Wood Toxicity & What You Should Do About It
Are woods poisonous? Hazardous to use in cutting boards or baby cribs? Find out here.
Wood Moves - Here's What You Need to Know
Wood is like a sponge, and it's always in a state of absorbing or releasing moisture to stay equalized with its environment. The problem with that is it also swells and shrinks. Here's what you need to know to protect your project.

Lumber Deals & Woodworking Tips

SIGN UP NOW to get a $10 coupon!

Our weekly email newsletter is pretty cool with project pictures made by our customers, woodworking tips, and lumber deals just for our newsletter subscribers.

We'll even give you $10 to use on any purchase of $50 or more at Woodworkers Source.


Check out the latest issue:


* indicates required
Do You Ever Visit One of Our Stores? *